Dry-erase working surfaces

Write directly onto the Visualizer working surface during presentations.

Dry-erase working surfaces are useful and convenient where making notes and annotations during a presentation. With this accessory, a presenter can write onto, and erase directly from the Visualizer working surface using special whiteboard markers and erasers. This enables the Visualizer to be used as a whiteboard or "digital flip chart". Dry-erase working surfaces are available in 2 piece packs.

Important

Only whiteboard markers and not permanent or non-permanent markers should be used with dry-erase working surfaces.

Storage of dry-erase working surfaces

Dry-erase working surfaces can be stored for up to 12 months in their original packaging - see date stamp on packaging. Ideal storage conditions: +20°C (68°F) at 50% relative humidity. Do not bend the replacement working surface foils.

All details can be found here.

 

XXL Dry-erase working surfaces

XXL size dry-erase working surfaces are also available for use with Ceiling Visualizer systems and EYE Cameras - giving an even larger writing area which can replace an existing blackboard or whiteboard. They are proving very effective when used as part of a lecture capture system.

 

 

Dry-erase working surface (2 pc. packs)

Model: Item Code
VZ-3 / VZ-3neo / VZ-8neo

102400

Dry-Erase Working Surface for VZ-neo.UHD Series (2 piece pack)

116074

Dry-Erase Working Surface for VZ-8.UHD (2 piece pack)

114762

VZ-8light4

105436

VZ-8plus4

105436

VZ-9plus³

105437

VZ-9.4F

105437

VZ-9.4L

105437

Ceiling Visualizer working surface (standard size)

105439

EYE-10/EYE-12/EYE-14 working surface (standard size)

105439


Extra Large Working Surfaces

Model: Item Code

XXL size working surface (920 x 520mm / 36.2 x 20.5")

111333 (1 piece pack)

XXL size working surface (920 x 520mm / 36.2 x 20.5")

111332 (5 piece pack)