Our Visualizer and Cynap systems are capable of communicating with Room Control Systems over their built-in data interface. Command protocols for our Visualizer systems can be found here.
Some of our Visualizers are also capable of communicating over the LAN and USB protocol in addition to RS232. The following Room control systems vendors are supporting our systems with drivers for their system development tools:
Additional information about the protocols for WolfVision Cynap and Visualizer systems can be found on the protocols tab in the downloads section.
Some of our Visualizers are also capable of communicating over the LAN and USB protocol in addition to RS232. The following Room control systems vendors are supporting our systems with drivers for their system development tools:
Additional information about the protocols for WolfVision Cynap and Visualizer systems can be found on the protocols tab in the downloads section.
The Cynap driver/template can be downloaded directly from this page. This Cynap driver/template can also be used to control VZ-3neo, VZ-8neo, VZ-8light4, VZ-8plus4, VZ-9.4F, VZ-9.4L, VZ-C6, and EYE-14 Visualizer units, but only if they are being fully integrated together with a Cynap system. |
|
Current versions for Cynap, Cynap Core, Cynap Pure | Model |
RMS module Version 1.01 for Cynap Pure (Optimized for Cynap Pure firmware version v1.32j) |
vSolution Cynap Pure ![]() |
RMS module Version 3.01 for Cynap/Cynap Core (Optimized for Cynap firmware version V1.32j) |
vSolution Cynap ![]() |
RMS module Version 2.02-1 for Cynap (Optimized for Cynap firmware version V1.12e) This version is for Crestron legacy 2-Series control systems only. Please note that this module has the same functionality as the Crestron 2.02 module above except that it does not support SSL/TLS communication with Cynap. |
vSolution Cynap ![]() |
Older versions for Cynap, Cynap Core | Model |
RMS module Version 1.0 for Cynap Pure (Optimized for Cynap Pure firmware version v1.29k and v1.30j) |
vSolution Cynap Pure ![]() |
RMS module Version 3.00 for Cynap/Cynap Core (Optimized for Cynap firmware version V1.30j) |
vSolution Cynap ![]() |
RMS module Version 2.07 for Cynap/Cynap Core (Optimized for Cynap firmware version V1.30j) |
vSolution Cynap ![]() |
RMS module Version 2.05.4 for Cynap/Cynap Core (Optimized for Cynap firmware version V1.22c to 1.28i) |
vSolution Cynap ![]() |
RMS module Version 2.05 for Cynap/Cynap Core (Optimized for Cynap firmware version V1.18 and 1.20) |
vSolution Cynap ![]() |
RMS module Version 2.04 for Cynap (Optimized for Cynap firmware version V1.16g) |
vSolution Cynap ![]() |
RMS module Version 2.03 for Cynap (Optimized for Cynap firmware version V1.14f) |
vSolution Cynap ![]() |
RMS module Version 2.02 for Cynap (Optimized for Cynap firmware version V1.12e) |
vSolution Cynap ![]() |
RMS module Version 2.00 for Cynap (Optimized for Cynap firmware version V1.10i) |
vSolution Cynap ![]() |
RMS module Version 1.14 for Cynap (Optimized for Cynap firmware version V1.06f) |
vSolution Cynap ![]() |
Visualizer drivers | Stand-alone Visualizer drivers for installations without a Cynap system are available for download from the Crestron Download Page. This module supports the following systems: |
Type | Model |
Portable Visualizers | vSolution Cam, VZ-3, VZ-3s, VZ-3neo, VZ-8neo, VZ-8neo+, VZ-8light4, VZ-8plus4, VZ-9Plus Serial #1008068 and Up, VZ-9plus3, VZ-9.4L, VZ-9.4F, VZ-P18, VZ-P38, |
Ceiling Visualizers | VZ-C12-II Serial #1009412 and Up, VZ-C123, VZ-C32 Serial #1011797 and Up, VZ-C323, VZ-C6, VZ-C3D |
Cameras | Eye-12, EYE-14 |
Crestron Download Page | |
Crestron supports the following devices with a driver over the RS232 protocol. Drivers are available for download from the Crestron Download Page. | |
Type | Model |
Portable Visualizers | VZ-8, VZ-8light, VZ-8plus, VZ-8light2, VZ-8plus2, VZ-8light3, VZ-8plus3, VZ-9, VZ-9plus and VZ-9plus3 |
Professional Visualizers | VZ-27, VZ-57, VZ-27plus, VZ-27plus², VZ-57plus, VZ-P18 and VZ-P38 |
Ceiling Visualizers | VZ-C10, VZ-C11, VZ-C12, VZ-C122, VZ-C123, VZ-C30, VZ-C32 and VZ-C323 |
Cameras | PSM-10, EYE-10, EYE-12, SCB-1 and SCB-12 |
The following devices are also supported with a driver which provides control capabilities over the RS232 and Ethernet/LAN interfaces: | |
Type | Model |
Portable Visualizers | VZ-9plus from serial number 1008068 and above, VZ-9plus3 |
Professional Visualizers | VZ-P18 and VZ-P38 |
Ceiling Visualizers | VZ-C122 from serial number 1009412 and above, VZ-C123, VZ-C32 from serial number 1011797 and above, VZ-C323 |
Cameras | EYE-12/SCB-12 from firmware version 1.10a and above |
You can download drivers from the Extron Download Page. Extron supports the following devices with drivers (written by Extron) over the RS232 protocol. For Cynap systems, drivers are available from the Extron website that interface between the WolfVision Wolfprot protocols and Extron systems. | |
Type | Model |
Portable Visualizers | vSolution Cam, VZ-3neo, VZ-8neo, VZ-8neo+, VZ-8, VZ-8light, VZ-8plus, VZ-8light2, VZ-8plus2, VZ-8light3, VZ-8plus3, VZ-8light4, VZ-8plus4, VZ-9, VZ-9plus and VZ-9plus3, VZ-9.4L, VZ-9.4F |
Professional Visualizers | VZ-27plus, VZ-27plus2, VZ-57plus, VZ-P18 and VZ-P38 |
Ceiling Visualizers | VZ-C10, VZ-C11, VZ-C12, VZ-C122, VZ-C123, VZ-C30, VZ-C32 and VZ-C323 |
High resolution live image camera | PSM-10 and EYE-10 |
Cameras | EYE-12 and SCB-12 |
The following devices are also supported with a driver which provides control capabilities over the RS232 and Ethernet/LAN interfaces: | |
Type | Model |
Portable Visualizers | VZ-9plus from serial number 1008068 and above, VZ-9plus3 |
Professional Visualizers | VZ-P18 and VZ-P38 |
Ceiling Visualizers | VZ-C122 from serial number 1009412 and above, VZ-C123, VZ-C32 from serial number 1011797 and above, VZ-C323 |
Cameras | EYE-12/SCB-12 from firmware version 1.10a and above |
The Cynap driver/template can be downloaded directly from this page. This Cynap driver/template can also be used to control vSolution Cam, VZ-3neo, VZ-8neo, VZ-8light4, VZ-8plus4, VZ-9.4F, VZ-9.4L, VZ-C6, and EYE-14 Visualizer units, but only if they are being fully integrated together with a Cynap system. |
|
Current versions for Cynap, Cynap Core & Cynap Pure | Model |
RMS module for Cynap Pure Version 1.01 Optimized for Cynap Pure firmware version v1.32j |
vSolution Cynap Pure ![]() |
RMS module for Cynap/Cynap Core Version 3.01 Optimized for Cynap firmware version V1.32j |
vSolution Cynap ![]() |
Older versions for Cynap, Cynap Core | |
RMS module for Cynap Pure Version 1.0 Optimized for Cynap Pure firmware version v1.29k and v1.30j |
vSolution Cynap Pure ![]() |
RMS module for Cynap/Cynap Core Version 2.07 Optimized for Cynap firmware version V1.30j |
vSolution Cynap ![]() |
RMS module for Cynap/Cynap Core Version 2.05.4 Optimized for Cynap firmware version V1.22c to 1.28i |
vSolution Cynap ![]() |
RMS module for Cynap/Cynap Core Version 2.05 Optimized for Cynap firmware version V1.18 and 1.20 |
vSolution Cynap ![]() |
RMS module for Cynap Version 2.04 Optimized for Cynap firmware version V1.16g |
vSolution Cynap ![]() |
RMS module for Cynap Version 2.03 Optimized for Cynap firmware version V1.14f |
vSolution Cynap ![]() |
RMS module for Cynap Version 2.02 Optimized for Cynap firmware version V1.12e |
vSolution Cynap ![]() |
RMS module for Cynap Version 2.00 Optimized for Cynap firmware version V1.10i |
vSolution Cynap ![]() |
RMS module for Cynap Version 1.14 Optimized for Cynap firmware version V1.06f |
vSolution Cynap ![]() |
Visualizer Drivers | Stand-alone Visualizer drivers for installations without a Cynap system are available for download from the AMX Download Page. Please note that you have to create a user account on the AMX homepage to get access to the driver download area. Creating such an account is free of charge. AMX supports the following devices with a Duet (written by WolfVision) over the Ethernet/LAN interface: |
Type | Model |
Desktop Visualizers | VZ-3, VZ-3s, VZ-3neo,VZ-8neo, VZ-8light4, VZ-8plus4, VZ-9.4F, VZ-9.4L, |
Ceiling Visualizers | VZ-C6, VZ-C3D |
Cameras | EYE-14 |
AMX supports the following devices with a Duet (written by WolfVision) or NetLinx module (written by AMX) over the RS232 protocol: | |
Type | Model |
Portable Visualizers | VZ-8, VZ-8light, VZ-8plus, VZ-8light2, VZ-8plus2, VZ-8light3, VZ-8plus3, VZ-9, VZ-9plus and VZ-9plus3 |
Professional Visualizers | VZ-15, VZ-35, VZ-45b, VZ-27, VZ-57, VZ-27plus, VZ-27plus2, VZ-57plus, VZ-P18 and VZ-P38 |
Ceiling Visualizers | VZ-C10, VZ-C11, VZ-C12, VZ-C122, VZ-C123, VZ-C30, VZ-C32 and VZ-C323 |
Cameras | EYE-12 and SCB-12 |
The following devices are also supported with a driver which provides control capabilities over the RS232 and Ethernet/LAN interfaces: | |
Type | Model |
Portable Visualizers | VZ-9plus from serial number 1008068 and above, VZ-9plus3 |
Professional Visualizers | VZ-P18 and VZ-P38 |
Ceiling Visualizers | VZ-C122 from serial number 1009412 and above, VZ-C123, VZ-C32 from serial number 1011797 and above, VZ-C323 |
Cameras | EYE-12/SCB-12 from firmware version 1.10a and above |
You can download these drivers from the Cue Download Page Be aware that you have to create a user account on the Cue homepage to get access to the driver download area. For creating a user account you have to enter the country you are from and your distributor (distributor has to verify you as customer). Creating a user account is free of charge. |
|
Cue supports the following devices with a driver (written by Cue) over the RS232 protocol: | |
Type | Model |
Portable Visualizers | VZ-8, VZ-8light, VZ-8plus, VZ-8light2, VZ-8plus2, VZ-8light3, VZ-8plus3, VZ-9, VZ-9plus and VZ-9plus3 |
Professional Visualizers | VZ-27, VZ-57, VZ-27plus, VZ-27plus2, VZ-57plus, VZ-P18 and VZ-P38 |
Ceiling Visualizers | VZ-C10, VZ-C11, VZ-C12, VZ-C122, VZ-C123, VZ-C30, VZ-C32 and VZ-C323 |
Cameras | EYE-12 and SCB-12 |
The following devices are also supported with a driver which provides control capabilities over the RS232 and Ethernet/LAN interfaces: | |
Type | Model |
Portable Visualizers | VZ-9plus from serial number 1008068 and above, VZ-9plus3 |
Professional Visualizers | VZ-P18 and VZ-P38 |
Ceiling Visualizers | VZ-C122 from serial number 1009412 and above, VZ-C123, VZ-C32 from serial number 1011797 and above, VZ-C323 |
Cameras | EYE-12/SCB-12 from firmware version 1.10a and above |
NEETS supports the following WolfVision Visualizer Systems with its own device drivers. This makes it very convenient when configuring NEETS control panels to work in combination with our devices. Further information: www.neets.dk |
|
Type | Model |
Desktop Visualizers | VZ-3, VZ-3S, VZ-8light4, VZ-8plus4, VZ-9plus (serial no. 1008068 and above), VZ-9plus3, VZ-9.4L, VZ-9.4F, VZ-P18, VZ-P38 |
Ceiling Visualizers | VZ-C6, VZ-C122 (serial no. 1009412 and above), VZ-C32 (serial no. 1011797 and above), VZ-C123, VZ-C323VZ-C3D |
Live Image Cameras | EYE-12, EYE-14, SCB-12 |