History-File of VZ8-II-firmware (VZ-8plus-2, VZ-8light-2, VZ-8plus-3, VZ-8light-3)

V1.11b	
	-	Fixed LED problems on keypad
V1.11a
	-	Added 16:10 resolution:
			VZ-8plus-3, VZ-8plus-2:	WXGA* (1280x800) and WXGA+ (1440x900)
			VZ-8light-3, VZ-8light-3: WXGA* (1280x800)
	-	Added ImageTurn function to Preset Control [for plus units only]
	-	Added OSD Menu status to Get Status commando for room managment systems
	-	Fixed Bug: Wrong reply value for Get Freeze commando
V1.10a
	-	Support new hardware: VZ-8plus-3
	-	Fixed Bug: Pos/Neg/Blue on video output
	-	Improved Noise Suppression
	-	Added Reset Lamp Hours in Extra menu
	-	Added Pixel Calibration in Extra Menu
	-	No DDC scanning when output resolution is set manually
	-	Improved Autoexposure
	-	Some minor features for adjustment/QC
V1.02a
	-	Added wide-screen resolution to VZ-8light-2 (WXGA and 720p)
	-	Improved brightness regulation
	-	Fixed Bug: Menu not shown when menu button is pressed on remote
	-	Some minor features for adjustment 
V1.01a
	-	New output settings menu: Resolution and picture size is displayed in menu.
	-	Added new feature: AMX device discovery over RS232 
	-	Change resolution WXGA to CVT standard (1360x768) [8plus-2 only]
	-	New return values for S1_GET_PORTRAIT command (serial protocol) [8plus-2 only]:
			0: 0°, 1: -90°, 2: 180°, 3: +90°	
	-	ImageTurn in 16:9 mode shows 3:4 picture [8plus-2 only]
V1.00e
	-	Fixed Bug: Visualizer not found on USB bus when computer starts.
V1.00d
	-	VESA compatibility in Extern Mode (DC offset in green channel)
V1.00c
	-	List of available resolutions corrected 
		Attention: Resolution maybe set to AUTO after successful update.
	-	Some minor bugs fixed, like OSD messages, gain control etc.
	-	Internal Update (Improved Adjustmentmenu)
V1.00b
	-   Internal Update (Improved camera communication)
V1.00a
	-	Initial Release