The WolfVision E-Mail Newsletter keeps you up to date with important Firmware Updates for your Visualizer and new product releases. Click here to register!

• For Visualizer Firmware Updates via USB or LAN port use the WolfVision Connectivity Software
• For Visualizer Firmware Updates via Serial RS232 port use the RS-232 Firmware Update Utility

Please note: Some WolfVision Visualizer models released before June 2003 (VZ-8, VZ-8light, VZ-8plus, VZ-27, VZ-57 and VZ-C10) have an USB-port, but can not update the Firmware via USB. Use the RS-232 Firmware Update Utility instead.

• For Firmware Updates of the cameras EYE-12 and SCB-12 (via USB or LAN port) use the WolfVision Connectivity Software
• For Firmware Updates of the cameras EYE-10, SCB-1 and PSM-10 (via Serial RS232 port) use the Camera Control Software

Please note:
It is important to check which Visualizer model you have and you must use the dedicated firmware for this model. When updating a VZ-9 Series Visualizer, please be aware that there are 3 different versions of the Visualizer VZ-9 (VZ-9 with old mainboard, VZ-9 with new mainboard and VZ-9plus). There is a dedicated firmware file for each of these 3 units.

Current models:

*Please note that this firmware version can not work together with older versions of the WolfVision Connectivity Software. Please update the WolfVision Connectivity Software to version 1.7 or higher.

Discontinued models:

>> Discontinued models page

Camera-Control-Software for Windows

• Version 1.5, released February 3, 2006, 2011 kB
• For Progressive Scan Cameras PSM-10, SCB-1 and EYE-10 (not for other camera models!)
• For controlling WolfVision cameras and Firmware Updates
• For Windows 98, Windows ME, Windows 2000 and Windows XP.
• Please note: This software can not be used for WolfVision Visualizers.

>> Manual for Control-Software (Version 1.5)

>> Check out our update utility for serial port page.

ATTENTION: NEVER USE THE VZ-DOWNLOAD TO LOAD THE REGULAR FIRMWARE ON THE VISUALIZER OF THE P-SERIES (VZ-P18, VZ-P38)!