History-File of FB4-Firmware for P-Series

V1.21b  12.07.2011
    -   Release VZ9P-3, VZ9P, VZ-C12-2, VZ-C12-3, VZ-C32, VZ-C32-3, VZ3
    -   Discontinued HP Serial Protocol
    -   Reworked menu
    -   Added German  and Turkish language support
    -   Implemented new behavior for VIEW button
    -   Support of latest IR remote control
    -   Fixed Black/White SFK when VZ was power cycled in color mode Black/White
    -   Fixed menu not showing up in USB mode when invoked with legacy protocol
    -   Fixed WebOSD changing network settings
    -   Extended multicast restable
    -   Fixed 3x3 mode when VZ was in FREEZE state
    -   Fixed SNAPSHOT memory overwrite
    -   Fixed changing of admin password
    -   Added Deep Power Down to WebOSD
    -   Added Language to WebOSD
    -   Blocked Item Reset (Long <7>) when in Help
    -   Fixed return from Help while in edit mode (multiple red letters appeared)
    -   Added "Preview Output" Help page
    -   Removed Icons for Height Status Info
    -   MISC SETTINGS renamed to MISCELLANEOUS SETTINGS
    -   Renamed Multicast Port to Streaming Port and fixed helptext
    -   Removed "Reset lamp hours" for all devices with LED light
    -   Blocked AF in Height adjustment
    -   Fixed Resolution Display info on Web Status Page when Testing resolution was executed
    -   Update Operating Hours on Web Status Page when changed in Adjustment Menu
    -   Fixed Output Resolution Line for VZ3 (Toggled between DVI and DVI/RGB)
    -   Added UNICAST streming
    -   Added Network Check to Adjustment
    -   Fixed Multicast parallel with 1 Singlecast
    -   Fixed Restore XML when VZ in ImgTurn Mem mode
    -   Fixed SFK list
    -   Fixed language in Quick setup (request was missing)
    -   Fixed wrong Image Format when VZ is switched off
    -   Fixed QuickSetupCount
V1.21a
    -   Release VZ3
V1.20g
    -   Release VZ-P18/38
    -   Fixed sporadic reboot
V1.20f
    -   Release VZ-P18/38
    -   Added IR support
V1.20e
    -   Release VZ-P18/38, VZ-C32
    -   Improvements for internal adjustment
V1.20d
    -   Fixed Memory Off command
    -   Improved touchhead power up behaviour
    -   Improved mirror power up behaviour
    -   Implemented Wolfprot WVC_DESCRIPTION command
    -   Improved focus fine tuning
    -   Improved focus tracking
    -   Compiled Java applets with 1.6.0_20 JDK
    -   Improved speed of firmware update
V1.20c
    -   Fixed JPEG encoder for very high contrast images
    -   Fixed focus problem when rf link is lost
    -   Fixed double commands from remote control
    -   Fixed OPAF stopping when rf link is lost
    -   Improved recovery from lost rf link
    -   Improved charging management of remote control battery
    -   Fixed remote control from unintentionally entering the firmware update mode
    -   Fixed deep standby mode
V1.20b
    -   Support for Cancel button in firmware update
    -   On loss of link, stop commands will be sent with 1 sec delay
    -   Fixed race condition in DHCP when cable is plugged in after start
    -   Support for 1080p/30 resolution
    -   View key also switches off memory zoom
V1.20a
    -   Initial Release